Help for Alpine - Filters
In a few words, a filter in Alpine is a mechanism of selecting mail
based on text that the message contains, status (New, Answered, etc), and
folder (which folder the message is in).
Filters give you the ability to split your mail into different
folders, in this way you can keep different types of mail in different
places. For example, I filter my mail so that only personal mail ends in
my INBOX, all messages from mailing lists are filtered into different
folders, each folder contains only messages received from that particular
list. In that way I can
- Distinguish easily what my personal mail is.
- Check easily when new mail has arrived from a particular mailing list.
Another use of filters is deleting unwanted e-mail (like spam), or
using it like a killfile in news.
Every time Alpine opens a folder, for each message in that folder it will
scan to check if any of the filters apply to the message, if it does it
will execute it and move on to the next message, where the cycle will
repeat again. Filters are also executed every time that new mail arrives
to the folder (if the folder is already open), or if the filter depended
on its status (message is new, answered), when the folder is about to be
Every filter has two parts, the conditions that activate the
filter (e.g. the message is from your boss) and the action to
be taken if the conditions are satisfied (e.g. move it to the folder "work").
When you want to define a filter, you must remember that the filter
will be activated if the conditions that you
specify are satisfied.
You can make Alpine act as many filters are you like on the same message, as long as
all the conditions in each filter match the message. A complete explanation of this
feature is given below. If the conditions of a filter match a particular message, you
can use the filter to either, delete the message (or in general flag it in any way
you want) or save it to a folder of your choice.
There is a further interesting consideration about filtering mail, which you need
to be aware of, and is the fact that the message that you filter from a folder is not
from the folder after it was filtered. The message will
be expunged when the folder is closed. This is not intuitive, because when you open
the folder you will have the impression that the message is not in the folder
anymore, but believe it or not, it is there. It was just marked "hidden" from your
view. A filtered message is set with the delete flag and hidden from your view.
It is important to notice that this "hidden" flag that
a filtered message has, is set the message has
been filtered. This may trigger a bug, which occurs when two sessions of
Alpine are trying to apply the same filter to a message. Under certain
circumstances a message could be filtered more than once to another
folder. It has been acknowledged that this is a limitation of filtering.
How Do I Set up a Filter?
To get to the filters setup screen you must press , you have two options essentially, you can press , and read help on how to set up filters or press to add a filter. Remember to give a good nickname to
each filter that you create so that you can go back to them afterwards if
changes are necessary in the future. You can also add a comment, in case
you need to remind yourself of anything related to the filter for the future.
When you start seting up a filter, you will see several lines that look like
Header pattern = <No Value Set>
If you put the cursor in anyone of them and press RETURN several times you
will see that this text will toggle between:
Header pattern = <No Value Set>
Header pattern = <Empty Value>
Here are their meaning:
- <No Value Set> means
that you do not care
about the value that this particular header has, or if this header is (or
not) present in the headers of the message being filtered. It is
considered a pattern match.
- <Empty Value> means that
there is a header with the specified name, but you do not care about its
value. For example the condition Cc pattern = <Empty
Value>, means that there is a Cc: header in the message that you
intend to filter.
There is a complete explanation of how to set these conditions in the
To Pattern, which you can get by putting the cursor
over that line and pressing the ? key. It is also worth
noticing that the ^T command is available for many of
these headers. You can read about the importance of this command here.
Notice that a difference between setting filters, and roles or scores
is that you need to define at least one condition in order for the filter
to be executed. In the case of filters this may be confusing, since it is
considered that not defining a pattern is always a pattern match. The
reason why you need to define a pattern for filtering is because filtering
is a potentially destructive operation; you may delete more e-mail than
you intended, so it's a protection measure.
There are also some special patterns that you should know before you start
adding filters, they are the
pattern. Here are their
meanings and why you
would like (or not like) to use them.
- The (actually called ), should contain one or several e-mail address. It is
considered a pattern match if the address entered there appears either in the or the
field. The reason why this pattern is important is because it saves you
the time to write two filters, one where the e-mail address appears in the
To: field, and another where the e-mail address appears in the Cc: field
(See the section on typical mistakes).
- The (actually called ), is very similar to the Recipient
pattern, as it includes a match for the content of the and fields. The only real
difference is that it also includes the field.
The same considerations that I wrote in the Recipient pattern apply to
this pattern too.
- The pattern, should contain any string
that you like, and it will be considered a match if that string is found
anywhere in the message, both the headers and the text of the message.
Notice that search is case insensitive, which means that searching for
"Fred", "FRED, "fred", etc will not make any difference in the final result.
- The is used
to indicate how long ago was the message originally sent. For example, you
can filter messages that have been 30 days in the folder to be deleted, or
moved to some other folder. All you need to write in this field is an
interval of the form , where the minimum number of days that the message has been
in the folder and is the maximum number of days
that the message has been in the folder. Observe that the interval
includes the end points. If you set to be Alpine will filter all messages that have been in the folder
for at least days.
Observe that there are two possible ways to compute this interval. On the one
hand one could use the date that the message was sent (which appears in the
Date: header), or one could use the date that the message was saved to that
folder (which is not visible in the message). You can decide which date to use
by setting (or unsetting) the configuration option
found at the bottom of each filter.
- The interval pattern is used to
activate a filter if the score assigned to this message is in a certain interval. The
default is that this will always be a pattern match.
The way one usually think of this pattern, is that you set a score as a
way to tell Alpine that it needs to distinguish between mail sent by person A
and mail sent by person B (something like, the message comes from one
specific address or the subject contains a certain string). One usually
uses this form of scoring not only for filtering but also for sorting.
You can also use this pattern to
filter messages that a criteria, instead
of those that do match one. Here is the way to do it.
Say that you know that there is a domain, say domain.org, from where you
usually receive spam, but you have a friend in that domain, whose e-mail
address is email@example.com, and you would like to delete all e-mail
coming from that domain, except the one that comes from your friend.
What you can do is set a "score rule" that will give a message from your
friend a score of 10, say, and set another score rule that will assign a
score of -5 to any e-mail from "domain.org". The result of this is that if
the mail is from your friend then it will get a score of 5 (10 + -5), but
any other e-mail from anyone else in that domain will get a score of -5.
Now you can set the score pattern to delete any e-mail message that has a
score of -5. In this way you will have filtered away messages from that
domain. If a message comes from another domain, it will not be affected
by this filter rule.
One of the powers of Alpine (as opposed to any other email program) is that
you can filter a message based on
header present in the message. One example of the use of this is when you use an
external filter (say) on
your e-mail that adds headers that show the result of another filter. A
typical case when this happens is when one uses filters to detect spam.
If you would like to filter based on a specific header not in the list of default
headers used by Alpine (From:, To:, etc.), you must add it to the list of header
first. In order to do so, put the cursor over
and press . You will be asked to enter the name of
the header. Say you wanted to add the extra header , then after entering the name of that header,
Alpine will add a line to the list of headers reading
, to which
you will need to add the value that you want to filter, using the above
Alpine allows you to match messages that do not satisfy the condition in the header
in a way that you do not need to use scores. For example, you can match that a
message does not come from a particular person. In order to do this, simply enter the
value of the pattern in the header pattern and press the key.
! From Pattern = Wilma Flinstone
matches a message that does not come from Wilma Flinstone. Notice that
! Cc Pattern = <Empty Value>
matches only if the message was not Cc'ed to anyone and
! Cc Pattern = <No Value Set>
is the same as
Cc Pattern = <No Value Set>
It is sometimes convenient to apply more than one filter to a message.
For example, one could use a filter to move a message to two different
Normally after Alpine has filtered a message, Alpine will not execute any more
filters on the message. If you need to tell Alpine that you want to have more
filters applied on the same message, you must enable the configuration option
at the bottom of the filter, so that Alpine will continue searching for another
filter that matches after it has found a message that matches this filter.
You can have an external program analyze your message, and use this
information to decide how you want to filter a message. A typical use of
this is to use an external program to determine if a message is spam.
Other uses include tests on the message that Alpine does not do (e.g. Alpine
does not test for the size of the message, or if a header exists and it is
Alpine includes three variables that control this. They are
Status Interval and the Character Limit.
Here's how they work
- The is the
full path of the program in the same computer where Alpine is running that
is going to be used to analyze the message. Remember that all headers and
body (including attachments) are passed to the program. If the program
listed in this configuration option is not found, the rule is not a match.
An interesting fact is that if the program has any type of output, it is not
captured by Alpine. In fact, it is lost, so if this output is discarded, how is
Alpine supposed to know what to do with the message? This leads us to...
- The is an
interval of the form , where a and b are
integers. In Alpine and interval of the form
means all integers between a and b including a and b, so for example,
is just the number 0, and
is the set of numbers -1, 0, 1 and 2 (in math, the
interval (a,b) does not contain a nor b, so this is not the mathematical
notation for intervals).
In case you are not aware of what the exit status of a program is,
is a brief explanation.
Normally every program is called from some other program. The most basic
call of one program to another is the operating system starting a program.
The calling program is called the parent and the called program the child,
this is because the process of the child was created by the parent. Normally
parent and child will do their own thing, until the child has finished. When
this happens, control returns to the parent. But what if the parent sent
the child to do something for it, how does it know if the child was
successful or not?. That is the point of the exit status. When the child
ends, the child returns an exit status to the parent. Normally the parent knows
how to interpret the exit status, so the communication between parent and
child is complete. Most programs return an exit value of 0 (zero) when they
have completed their tasks successfuly and some other number (either positive
or negative) when they have failed, or something has gone wrong.
For example, the spamassassin program can be called with the switch. When called this way, it exits with status 0
if the messages is not spam but non zero if it is.
You can have a program exit with any exit status that you like, if you
wrap the program in a script. This means that instead of calling the
program directly (and checking its exit status), you can write a script
that calls the program and then exit the script with your favorite
exit status. If you do not know how to do this, do not worry, it is
- The variable indicates how
many characters of a message should Alpine take from the message so that the
filter program can do its job. This is useful because some messages can be
huge (e.g. if they contain attachments), so that processing them can be
very slow and this is undesirable.
There are some special values that this variable can have. The special value
-1 means that the full message (headers and body) will be fed to the program
(a bad idea), a value of 0 (zero) means that only the headers will be
fed to the program, and any other possitive value means that the headers plus
that many characters from the body will be fed to the filter.
You can read an explicit example on
how one can use this method to filter messages.
In this section you need to specify the folder over which the filter is
supposed to act. There are several options, all of them self explanatory.
The only non obvious part is how to fill the "Specific" field. If you need
to filter from a specific newsgroup you should give the following syntax:
In essence, anything that is non local you must give a location in the
format above, or if it's local I recommend to give the full path.
Do not check (*) Email and then enter a specific folder, this causes all
Email folders to match.
You can filter a message based on its status, meaning, it's New,
Answered, Important or Deleted. The meaning of each of these selections is
very clear. The only pattern that may confuse you is the pattern for New
message. Unfortunately, there is an inconsistency in the meaning of the
word , which may cause you some grief when setting up
In the default configuration of Alpine, you will think that a message is
when it has the in the
index. If you have never changed the index-format in the index screen,
then you will see a flag on messages that are either
new or have not been read, and they are referred by Alpine as messages. For example, if you read a message and want
to set it to unread, you would flag it new again. A
message that is new in this sense is called .
The use of the word New above is used as opposed to a new message that is , that is a message that arrived after that last time that the
folder was closed by another process and opened by you in the session that you are
trying the filter.
Notice that at the bottom of the selection there is an option
This option was created in order to avoid a problem in which Alpine would filter
a message twice if, for example, the connection to the server was broken during the
normal operation of Alpine. In that case, the message was filtered for the second
time when a new connection was created. Notice that even with this option enabled,
messages can still be filtered twice (or more times!), since if two sessions of
Alpine are accessing the INBOX, there's a small chance that this may happen. In any
case, the likelihood of messages being filtered twice with this option enabled is
very small, and you should set it.
In the configuration screen of Alpine (press to
get there), there are a few options that affect the way that roles work. Here
they are all explained.
name: quell-filtering-done-message"). This options makes Alpine not print
a message indicating that a specific filter has been activated and has
successfuly been applied. The reason why one wants to supress this message
is because otherwise you would see this message popping in the status line
at random times, which might be distracting and/or annoying.
- (pinerc name:
quell-filtering-messages). If this option is set, no warning about a
filter being processed will be displayed at all, therefore, you will never
have any indication of any filter being applied at any time. If this
feature is set, then the feature Suppress Filtering Done Messages is
assumed to be set too.
- (pinerc name:
enable-rules-under-take). This feature is indirectly related to filters,
but if enabled, will enable you to press the command
on a message and create a role based on the message that you are reading.
This is a great way to save some time, since some fields will be filled
for you, and those that are not relevant to the configuration of the role
(like the subject of the message) can be removed or edited.
- (pinerc name:
use-resent-to-in-rules). This feature enables an old behavior in Pine and Alpine which made Alpine
search for matches in the To: and Resent-To: headers, when it was searching
for matches for the To: pattern. This feature was disabled because some
IMAP servers fail to do this type of search.
- One of the most typical mistakes when adding filters is adding the
same header to two (or more) header patterns, like To: and Cc:. This is a mistake
usually because when somebody sends you a message, your e-mail address is
in either the To: field or the Cc: field but not in both. If you intention
was to set a filter that worked if your address was in the To: or the Cc:
field, use the Recip Pattern as explained before. Also consider using the
Partic Pattern for doing this task.
- Another typical mistake is that it takes some time to figure out that
for filtering a message from a newsgroup you need to write the name of the
news server from which the message is going to be filtered. The syntax was
explained before in the "folders" section.
- Be careful when entering the data, once I intended to enter a period
"." and entered a comma ",". In this form I realized later that I was
filtering more messages than what I intended, so be careful in your input.
- When specifying a folder in the Current Folder Type section, do not
check (*) Email and then enter a specific folder, this causes all Email
folders to match. In other words, the specific folder is ignored.
- Remember that there is a distinction between <Empty Value> and
<No value Set>. This is important as it may make the difference
between the filter matching the message or not.
Here there is a link to examples of how to
set up certain patterns. It is in some sense an expanded version of some
of the information given here, but with much more additional information.